Windscreen Pro-Installer Tips

How to Install Fence Windscreen

The “Pro-Installer” method for a wrinkle-free fit.

Quick Answer

To install fence windscreen without wrinkles, use the “10-Foot Section” method. Hang the top edge for 10 feet, pull it taut horizontally, and then secure the bottom edge of that same section before moving forward. Always use UV-treated zip ties at every grommet.

Tools & Materials

1. The Screen

Permascreen 80 for athletic and permanent, Permascreen Plus for challenging weather, Construction 85 for job sites and events, Polypro 95 for max privacy athletic and permanent applications..

2. The Fasteners

50lb ties for standard use; 120lb for high-wind areas.

3. The Hardware

Side cutters (snips) and a stable step ladder.

Step-by-Step Installation

1

Prepare Your Fence

Walk the fence line. Remove old ties, vines, or debris. Ensure posts are sturdy enough for the increased wind load.

2

Start at the Top Corner

Stand the roll up at the starting post. Secure the top corner grommet first.
⚠️ Warning: Do not tighten ties 100% yet; leave slack for adjustment.

3

The “10-Foot Section” Method

This is the secret to a professional fit. Work in small sections:

  1. Attach the top grommets for roughly 10 feet.
  2. Pull the screen taut horizontally to remove wrinkles.
  3. Return to the start and attach the bottom grommets for that same 10 feet.
4

Tighten and Trim

Walk back down the line. Tighten every zip tie firmly with your side cutters, then snip the excess plastic tail off for a clean finish.